Now this was only controlling it manually through the nvidia-settings software. Go to the ‘Thermal Settings’ section and you can control the fan speed by your own hands:Ģ.Controlling fan speed Automatically at boot with a script (Step 1 required) The reference sheet is available at … But it’s recommended to keep it at 28 to enable all the features.Īfter this, a reboot or a logout is required to apply the changes.Īfter the reboot/login, open the NVIDIA X Server Settings application Note: You may want to change the Coolbits value to your own needs. VendorName 'NVIDIA Corporation' Option 'Coolbits' ' 28' EndSection

# You may change the identifier number to your use case. Note that this might not work on some distributions and you may be required to edit /etc//nf and add the following lines: Section 'Device' Sudo nvidia-xconfig -a -cool-bits=28 -allow-empty-initial-configuration The ‘Nvidia X server Settings’ application is installed along with the proprietary driver.The following command needs to be executed in Terminal to enable fan control in Nvidia X server Settings: Here’s a short guide on how to control the fan using Nvidia X Server Settings. Nvidia doesn’t enable this feature by default and it’s on the user to enable it using the command line.īack in the days, it used to be nvclock but the support was dropped in 2010. Controlling Fan Speed Headlessly 1.Controlling fan speed Manually (Mandatory configuration changes) Controlling Fan Speed Automatically at boot with the Green With Envy GUIĤ. Controlling Fan Speed Automatically at boot with a scriptģ. Controlling Fan Speed manually (Mandatory step)Ģ. In linux, the fan speed is not controlled by default and the card itself auto adjusts the fan speed in this tutorial I’m going to teach a way to Automatically and Manually control the fan speed of an Nvidia graphics card on Linux with proprietary drivers at Boot and Reboot.ġ.

Fan control software linux